GPAWorld

University GPA calculator

Auckland University of Technology GPA Calculator

Calculate your semester GPA and updated CGPA using Auckland University of Technology's own grading scale, credit weighting, rounding rules, and CGPA formula — not a generic New Zealand average.

Formula type

9-point GPA scale

12 grades carry points, 11 do not, and results are rounded to 3 decimal places. Verified 2026-07-21.

GPAWorld

University GPA Calculator

Semester GPA

9.000

Updated CGPA

--

GPA Credits

9

Rows

3

Auckland University of Technology

New Zealand · 9-point GPA scale

Change university

Enter your current CGPA and completed credits to calculate your updated CGPA. Your semester GPA is shown from your courses below.

Semester Courses

9 credits entered

Auckland University of Technology grading at a glance

Grading scale
9-point GPA scale
Scale range
0.0 to 9.0 — a higher number is a better grade
Grades that carry points
12 grades count toward the GPA, plus 11 administrative grades that do not
Best possible grade
A+ (9.0 points)
Lowest passing grade
C- (1.0 points) — the weakest grade that still earns credit
Failing grades
D, DNS, and DNC — counted in the GPA but earning no credit
Semester GPA rounding
Rounded to the nearest 3 decimal places
Cumulative GPA rounding
Rounded to the nearest 3 decimal places
Credit hours per course
0.0 to 120.0, in steps of 0.5
Pass/fail courses
Supported (S, CO, M, and P) and excluded from the GPA
Zero-credit courses
Allowed, but they do not move the GPA
Repeated courses
Needs manual review
Percentage bands published
Yes — 10 grades map to a mark range
Grading data last verified
2026-07-21

Auckland University of Technology grading scale

Every grade Auckland University of Technology awards, the points it carries, and whether it counts toward the GPA or earns credit. This is the table the calculator above runs on.

Auckland University of Technology grade points, GPA inclusion and credit rules
GradeMeaningMark rangePointsGPA countedCredit earned
A+Pass with High Distinction89.5–100%9.0YesYes
APass with Clear Distinction84.5–89.49%8.0YesYes
A-Pass with Distinction79.5–84.49%7.0YesYes
B+Pass with High Merit74.5–79.49%6.0YesYes
BPass with Clear Merit69.5–74.49%5.0YesYes
B-Pass with Merit64.5–69.49%4.0YesYes
C+High Pass59.5–64.49%3.0YesYes
CClear Pass54.5–59.49%2.0YesYes
C-Pass49.5–54.49%1.0YesYes
DFail0–49.49%0.0YesNo
DNSDid Not Sit—0.0YesNo
DNCDid Not Complete—0.0YesNo
SAegrotat Pass—ExcludedNoYes
CRCredit for Prior Learning—ExcludedNoYes
COConceded Pass—ExcludedNoYes
MCompetency Pass with Merit—ExcludedNoYes
PCompetency Pass—ExcludedNoYes
FCompetency Fail—ExcludedNoNo
WWithdrawn—ExcludedNoNo
DSDisrupted Study Fail—ExcludedNoNo
DSNDisrupted Study Did Not Complete—ExcludedNoNo
STCStill to Complete—ExcludedNoNo
UXUnder Examination—ExcludedNoNo

How the Auckland University of Technology GPA formula works

Auckland University of Technology converts every graded course into quality points by multiplying the grade's point value by the course's credit hours. Your semester GPA is the total quality points divided by the total credit hours that count toward the GPA, and the result is rounded to the nearest 3 decimal places. Points run from 0.0 up to 9.0, so a higher average is a better result. The scale uses plus and minus grades, so there are 12 distinct point values rather than a handful of whole steps: A+ is worth 9.0 and A is worth 8.0.

What gets left out of the average

S, CR, CO, M, P, F, W, DS, DSN, STC and 1 other carry no point value at Auckland University of Technology, so a course marked with one of them drops out of the division entirely — it changes neither the top nor the bottom of the fraction. S, CR, CO, M, and P still earn credit toward your degree while staying out of the GPA, which is why your credit total can climb in a semester where your GPA barely moves. D, DNS, and DNC work the other way: they earn no credit but are still counted in the average at 0.0 points, so a failed course pulls the average down while adding nothing to your progress.

How this semester rolls into your CGPA

AUT GPA is calculated by assigning a numeric value to each grade, multiplying by paper points, summing those values, and dividing by the total paper points. In practice that means your existing CGPA is turned back into quality points by multiplying it by your completed credits, this semester's quality points are added on, and the total is divided by your new credit total. Both the semester and the cumulative figures are rounded to the nearest 3 decimal places. Repeat handling is not published as a rule this calculator can apply automatically, so retaken courses need to be checked against the current catalog.

How Auckland University of Technology compares with other New Zealand universities

Auckland University of Technology shares the 9-point GPA scale with Lincoln University, Massey University, University of Auckland and 3 others, while University of Canterbury grade on a different scale. Rounding is not uniform either: Auckland University of Technology has its cumulative average rounded to the nearest 3 decimal places, whereas Lincoln University, Massey University and 5 others do it differently.

A GPA only means something alongside the scale it was calculated on, which is why comparing raw numbers between institutions — even neighbouring ones — is unreliable. See the New Zealand comparison table for every university covered there side by side.

Converting this GPA to a 4.0 scale

Auckland University of Technology does not grade on the US 4.0 scale. Its scale runs to 9.0 rather than 4.0, with 12 point values in use and C- as the lowest passing mark. There is no single correct formula for converting that into a 4.0 GPA, and GPAWorld deliberately does not publish one: every graduate school, employer and credential evaluator applies its own conversion table, and a number invented here could cost you an application. Calculate your GPA on this page using the real Auckland University of Technology scale, then let the institution you are applying to convert it with their table.

Worked examples

Each example below is run through the same engine the calculator uses, so the numbers show Auckland University of Technology's own rounding.

A typical graded semester

A student sitting at 6.480 after 60 completed credits takes 3 courses worth 3 credits each.

  • Core course3 credits × A+ (9.0 points)
  • Elective3 credits × A- (7.0 points)
  • Lab or seminar3 credits × B (5.0 points)

Semester GPA 7.000 · Updated CGPA 6.548

The semester total is 63 quality points over 9 counted credits. Because the cumulative average now spans 69 credits, one semester moves it only a little — this is why a CGPA gets harder to shift the further into a degree you are.

Adding a course graded S

The same student adds a fourth 3-credit course graded S (Aegrotat Pass).

  • Core course3 credits × A+ (9.0 points)
  • Elective3 credits × A- (7.0 points)
  • Lab or seminar3 credits × B (5.0 points)
  • Aegrotat Pass course3 credits × S (no grade points)

Semester GPA 7.000 · Updated CGPA 6.548

The semester GPA is unchanged at 7.000. S carries no grade points at Auckland University of Technology, so the course is removed from both sides of the division — even though the credit still counts toward the degree. Students often expect a fourth course to move the average and are surprised when it does not.

What one D costs

The same semester again, but the last course comes back as D (Fail) instead.

  • Core course3 credits × A+ (9.0 points)
  • Elective3 credits × A- (7.0 points)
  • Failed course3 credits × D (0.0 points)

Semester GPA 5.333 · Updated CGPA 6.330

The semester GPA slips from 7.000 to 5.333, and the cumulative average slips from 6.548 to 6.330. D is worth 0.0 points and earns no credit, so it weighs the average down while adding nothing to your degree progress.

What this semester does to your CGPA

A student with a 6.480 CGPA after 60 credits takes 4 courses worth 3 credits each (12 credits in total). Here is where that CGPA lands if every course comes back at the same grade — calculated with the Auckland University of Technology scale and rounding.

Projected Auckland University of Technology CGPA after a 12-credit semester
If every course isSemester GPANew CGPAMovement
A+ (9.0)9.0006.900+0.420 (better)
A- (7.0)7.0006.567+0.087 (better)
B (5.0)5.0006.233−0.247 (worse)
C+ (3.0)3.0005.900−0.580 (worse)
C- (1.0)1.0005.567−0.913 (worse)

Your own starting CGPA and completed credits will differ — enter them in the calculator above for your real figure.

Common mistakes when calculating your Auckland University of Technology GPA

These are the places where the Auckland University of Technology rules differ from what most students assume, and where a hand calculation usually goes wrong.

  1. Counting S, CR, CO, M, and P courses in the average

    These earn credit at Auckland University of Technology but carry no grade points, so they belong in your credit total and nowhere near the GPA division. Including them is one of the most common reasons a hand-calculated GPA comes out wrong.

  2. Dropping a failed course from the calculation

    D, DNS, and DNC earn no credit toward the degree, but they are still counted in the GPA at 0.0 points. Leaving a failure out flatters the result.

  3. Guessing the plus/minus values

    At Auckland University of Technology, A+ is worth 9.0 and A is worth 8.0. Those steps differ between universities, so a value copied from another school's chart will quietly skew the whole average.

  4. Averaging the grades instead of weighting them

    A course worth twice the credits moves your GPA twice as much. Adding up your grade points and dividing by the number of courses ignores that weighting and is almost always wrong.

  5. Expecting a 0-credit course to move the number

    Auckland University of Technology allows them, but with no credit hours they contribute nothing to either side of the division.

  6. Handling a retake by guesswork

    Repeat handling is not published as a rule this calculator can apply automatically, so retaken courses need to be checked against the current catalog. Check the current catalog before assuming an old grade has left your record.

Auckland University of Technology GPA — frequently asked questions

What is a passing grade at Auckland University of Technology?

C- (1.0 points) is the weakest grade in the Auckland University of Technology table that still earns credit. Anything below it — D, DNS, and DNC — is counted in your GPA but earns no credit toward the degree. Individual programmes can set a higher minimum for courses in your major, so check your programme handbook as well.

What is the best GPA you can get at Auckland University of Technology?

9.0 on the 9-point GPA scale, which you reach by earning A+ (9.0 points) in every course that counts toward the GPA.

Does Auckland University of Technology round GPA up?

The cumulative average is rounded to the nearest 3 decimal places, and the semester average is rounded to the nearest 3 decimal places. That is ordinary rounding, so a result sitting exactly half a step along goes up.

Is this a generic New Zealand GPA formula?

No. This page is generated from the grading configuration for Auckland University of Technology alone — its 12 point values, its standard rounding, and its own rules for pass/fail and repeated courses. Other universities in New Zealand routinely use different point values or a different scale entirely, so the same grades can produce a different GPA elsewhere.

Do pass/fail courses affect my GPA?

No. S, CR, CO, M, and P earn credit at Auckland University of Technology without carrying grade points, so they are excluded from the GPA division entirely. Your completed-credit total goes up while the average stays where it was.

Which grades are excluded from the Auckland University of Technology GPA?

S (Aegrotat Pass), CR (Credit for Prior Learning), CO (Conceded Pass), M (Competency Pass with Merit), P (Competency Pass), F (Competency Fail), W (Withdrawn), DS (Disrupted Study Fail), DSN (Disrupted Study Did Not Complete), STC (Still to Complete), and UX (Under Examination) carry no grade points and are left out of the average. Of those, S, CR, CO, M, and P still earn credit toward the degree.

What happens to my GPA if I repeat a course?

Repeat handling is not published as a rule this calculator can apply automatically, so retaken courses need to be checked against the current catalog.

How much does one semester change my cumulative GPA?

Your CGPA is weighted by every credit you have already completed, so a single semester moves it less the further along you are. Fifteen credits added to sixty already completed is a fifth of your record; the same fifteen added to a hundred and twenty is an eighth of it. Use the calculator at the top of this page with your real completed-credit total rather than estimating the movement.

What percentage is a A+ at Auckland University of Technology?

A+ covers 89.5–100% and is worth 9.0 grade points. The full percentage-to-grade table for all 10 graded bands is published on this page.

Is this calculator official?

No. GPAWorld is an independent tool and is not affiliated with or endorsed by Auckland University of Technology. The grading data on this page was taken from AUT - Results and Grading and AUT - How to Calculate Your Grade Point Average for Scholarships and last verified on 2026-07-21; every source is linked on this page so you can check it yourself. Your registrar's record is always the authority.

Notes on this university's data

Judgement calls and caveats recorded when this grading configuration was built from the official sources. They are published so you can see exactly what the calculator assumes.

  • AUT has its own official grading system and is not treated as a generic New Zealand formula.
  • AUT's public scholarship GPA page states fail grades including DNS and DNC retain their points with zero numeric value.
  • DS and DSN are excluded from GPA under AUT's disrupted-study rule.
  • Repeated-course handling is manual review because a clear public repeat replacement rule was not found.